Published works | Faculty of Mechanical Engineering in Zenica

MECHANICAL ENGINEERING

JOURNAL OF MECHANICAL ENGINEERING
JOURNAL OF MECHANICAL ENGINEERING

Editorial office | Instructions for authors | Published works

Year 2023

Vol 20, Number 1-2, OPTIMIZATION OF PROCESSING MODE ELEMENTS USING A PLANNED EXPERIMENT, Kopčić, O.; Ekinović, S.

Vol 20, Number 1-2, APPLICATION OF THE MONTE CARLO METHOD FOR OPTIMIZATION OF THE MATHEMATICAL MODEL OF SURFACE ROUGHNESS, Gredelj, S.; Hrnjica, S.

Vol 20, Number 1-2, MATHEMATICAL AND NUMERICAL ANALYSIS OF THE RELATIONSHIP BETWEEN LOSCHMIDT'S CONSTANT, AVOGADRO'S CONSTANT AND SOUND VELOCITY IN REAL GASES AT DIFFERENT THERMODYNAMIC PROPERTIES (pvT), Neimarlija, N.; Arifović, K.

Vol 20, Number 1-2, INVESTIGATION OF ENGLISH SPEAKING SKILLS IN ENGINEERING CLIL TEACHING, Tarabar A.

Vol 20, Number 1-2, Masinstvo (complete PDF)

Year 2022

Vol. 19, Number 1-4, COMPARISON OF TYPICAL HOUSEHOLD ELECTRICITY CONSUMPTION COVERAGE FOR DIFFERENT AREAS IN BOSNIA AND HERZEGOVINA, Špago, D.; Šunje, E.

Vol. 19, Number 1-4, PROGRAMMING OF MILLING PROCESSING USING ESPRIT, Hrnjica, S.

Vol. 19, Number 1-4, 3D DIGITALIZATION AND PRINTING OF THE SCULPTURE FROM THE NATIONAL MONUMENT "SMRIKA", Kačmarčik, J.; Varda, K.; Bešlagić, E.

Vol. 19, Number 1-4, USING NI MULTISIM PROGRAM IN PERFORMING LABORATORY EXERCISES IN ELECTRONIC CIRCUITS AND DIGITAL ELECTRONICS, Zorić, J.

Vol. 19, Number 1-4, MATHEMATICAL AND NUMERICAL ANALYSIS OF THE RELATIONSHIP BETWEEN LOSCHMIDT'S CONSTANT, AVOGADRO'S CONSTANT AND SOUND SPEED IN IDEAL AND REAL GAS IN STANDARD STATE, Neimarlija, N.; Bijedic, M.; Imamović N.

Vol 19, Number 1-4, Masinstvo (complete PDF)

Year 2021

Vol. 18, Number 1-2, OVERVIEW OF THE CURRENT STATE OF SCIENTIFIC RESEARCH WORK IN BIH, Žilić, L., Lisica, A.

Vol. 18, Number 1-2, INFORMATION TECHNOLOGIES FOR MONITORING THE MAINTENANCE OF TECHNICAL SYSTEMS AT PK "VRTLIŠTE" RMU "KAKANJ", Bajramović, K., Bajramović, I.

Vol. 18, Number 1-2, DETERMINATION OF DELTA FERRIT IN AUSTENITE STAINLESS STEELS, Gigović-Gekić, A., Avdušinović, H.

Vol. 18, Number 1-2, NUMERICAL ANALYSIS OF FLOW AND PRESSURE IN A PISTON VALVE, Mujkanović, A., Bošnjak, A., Gehrmann, M.

Vol 18, Number 1-2, Masinstvo (complete PDF)

Vol 18, Number 3-4, NOISE MAP MODELING FOR BUSINESS ZONE "BUKVA-VILA" IN TEŠNJ, Imamović, N.; Kadušić, E.; Birdahić, V.

Vol 18, Number 3-4, CALCULATION AND APPLICATION OF BELT CONVEYOR IN "KAKANJ" MINE, Bajramović, K.; Bajramović, I.

Vol 18, Number 3-4, MANAGEMENT OF RISK PROCESSES IN PROJECTS ACCORDING TO ISO 10006:2017 GUIDELINES, Babić E.; Jašarević, S.

Vol 18, Number 3-4, CREATION OF QUALITY NETWORK INFRASTRUCTURE FOR SUCCESSFUL BUSINESS, Redžibašić, M.

Vol 18, Number 3-4, FABLAB'S SPECTROMETER WITH RELATED EQUIPMENT, Karamehmedović, E.; FabLab Team

Vol 18, Number 3-4, Masinstvo (complete PDF)

Year 2020

Vol. 17, Number 1-2, GENERAL CONSIDERATIONS OF GROUNDWATER MOVEMENT, Mešić, H.

Vol. 17, Number 1-2, ANALYSIS AND CONTROL OF THE IMPACT OF TRAFFIC NOISE ON BUILDINGS LOCATED ALONG THE SECTION OF THE MAIN CITY HIGHWAY GGM ZENICA, Turčinović, N.

Vol. 17, Number 1-2, ANALYSIS OF THE FIRST EXPERIENCES IN THE IMPLEMENTATION OF FSCTM STANDARDIZATION IN THE ZENIČKO-DOBOJ CANTON, Zahirović, E.; Osmanović, M.; Đulić, E.

Vol. 17, Number 1-2, EXAMPLE OF APPLICATION OF CMM AND CAD IN REVERSIBLE ENGINEERING, Baručija, A.; Kačmarčik, J.; Lemeš, S.; Unkić, F.

Vol. 17, Number 1-2, CALCULATION OF TRANSPORT OF DISCOVERY TO "BIJELE VODE" LANDFILL WITH DAMPERS BELAZ 75135, Bajramović, K.; Bajramović, H.

Vol. 17, Number 1-2, NUMERICAL CALCULATION OF STRESS IN A PIPE USING SOLIDWORKS AND ANSYS SOFTWARE, Bajtarević, A.; Jeleč, A.

Vol 17, Number 1-2, Masinstvo (complete PDF)

Vol 17, Number 3-4, ANALYSIS OF AXIAL TESTS OF CONVEYOR BELT SAMPLES, Ilanković, N, Živanić, D, Katona, M.

Vol 17, Number 3-4, DESIGN OF EXPERIMENT AND MATHEMATICAL MODEL OF BENDING STRENGTH OF SOLID WOOD PANEL, Hurem, N, Hodžić, D.

Vol 17, Number 3-4, APPLICATION OF QFD METHOD IN THE CASE OF BATHROOM FURNITURE IN FRAMINI LTD. VITEZ, Sabahudin, J, Lisica, A, Lemeš, S, Pašalić-Medarić, A.

Vol 17, Number 3-4, TEST SAMPLING AND MONITORING OF PHYSICAL-CHEMICAL PROCESSES WITH WASTEWATER TREATMENT DEVICE, Terzić, M.

Vol 17, Number 3-4, Masinstvo (complete PDF)

Year 2019

Vol. 16, Number 1-2, Multi-objective optimization of MQCL turning process parameters using gray-fuzzy approach, Dragičević, M.; Begović, E.; Peko, I.

Vol. 16, Number 1-2, Provision of spare parts, Brdarević, S.; Klisura, F.; Jašarević, S.

Vol. 16, Number 1-2, Determining the influence of the closing time of the water flow on the level of water oscillation in the water table, Bubalo, A.; Torlak, M.

Vol. 16, Number 1-2, Application of compressed air in pits "Haljinići", JP EP BiH dd - Sarajevo, ZD RMU "Kakanj" doo Kakanj, Bajramović, K.; Bajramović, H.

Vol. 16, Number 1-2, Attributional Versus Consequential Life Cycle Assessment Modeling in Metalworking Production System, Agarski, B.; Vukelic, Dj.; Hadzistevic, M.; Ilic Micunovic, M.; Budak I.

Vol 16, Number 1-2, Masinstvo (complete PDF)

Vol 16, Number 3-4, Quality of forging as a function of tool stability during processing of wheel sleeves of motor vehicles, Papić, S.; Klisura, F.; Velić, S.

Vol 16, Number 3-4, Fractures of metal parts, Oruč, M.; Sulunahpašić, R.; Hadžalić, M.

Vol 16, Number 3-4, Use of arduino microcontroller on student hybrid vehicle Hermes, Ilanković, N.; Stojić, B.; Ružić, D.; Tepavac, N.; Živanić D.

Vol 16, Number 3-4, Impact of Vocational Education; years of work experience and place of occurrence on the number of injuries at work - example of Mine "Abid Lolić Bila", Jašarević, S.; Karić, M; Klisura, F.

Vol 16, Number 3-4, Possibilities of applying the plant and pollution register in the Zenica-Doboj Canton, Šišić, M.; Goletić, Š.; Prcanović, H.

Vol 16, Number 3-4, Total quality management practices in Bosnia and Herzegovina: Are organizational contextual factors important?, Kulenović, M.; Veselinović, LJ

Vol 16, Number 3-4, Masinstvo (complete PDF)

Year 2018

Vol. 15, Number 1, Numerical simulation of two-phase flow with an interface, Berberović E.

Vol. 15, Number 1, Experimental analysis of buckling of plastic containers, Hodzic D., Hodzic A.; Islamović F.

Vol. 15, Number 1, Methodology, tools and possibilities of structural analysis of the hook as part of the lower roller in the CAD/CAE system Catia, Papić S.; Hasanović E.

Vol. 15, Number 1, Procedure for the establishment of micro plants of renewable energy sources and the profitability of the investment, Tiro D.

Vol. 15, Number 1, Reliability index calculation on the example of a steel hall frame, comparison of PTP and EC-1 snow load regulations, Hadzović R.; Redžić V.; Redžić N.

Vol. 15, Number 1, Investigating the relationship between the motivation of engineering students and the integrated English language and vocational (CLIL) approach, Tarabar A.; Ahmetspahić A.

Vol 15, Number 1, Masinstvo (complete PDF)

Vol 15, Number 2, Analysis of Water Evaporation in Twin Screw Compressors Using CFD, Rane S., Kovačević A., Stošić N., Stupple G.

Vol.15, Number 2, Finding the Actual Causes of Hydraulic Cylinder Fault, Lovrec, D.; Tič, V.

Vol. 15, Number 2, Examination of the quality of cabins of working machines, Dekanović K., Bajramović E., Bajramović E.

Vol.15, Number 2, SOPHIA-BIESSE's step towards Industry 4.0, Lisica A.

Vol. 15, Number 2, E-learning with powerpoint presentation: modeling quiz questions, Žiga A.; Alajbegović H.

Vol. 15, Number 2, Masinstvo (complete PDF)

Vol. 15, Number 3, Research on the relationship between technological ability and the speed of new product acquisition in the solid wood furniture industry, Brdarević S., Murčo O., Hasanić S.

Vol. 15, Number 3, Planning of necessary capacities in SMEs; computer aided engineering approach, Lisica A.

Vol. 15, Number 3, How to Determine the Cause and Source of Hydraulic Oil Varnishing, Lovrenc D.; Tič V.

Vol. 15, Number 3, Processing of municipal waste as an alternative fuel in the cement industry, Bajtarević A., Bajtarević A., Hadžikadunić F.

Vol. 15, Number 3, Wastewater Treatment of the City of Zenica, Mešić, H.

Vol. 15, Number 3, Masinstvo (complete PDF)

Vol. 15, Number 4, Combined experimental-numerical analysis of elastic balls exposed to pressure between plates, Kargić, M.: Karač A.

Vol. 15, Number 4, Determination of the recalibration interval of laboratory equipment, Kubat, A.; Pasalić, S.; Becirović, A.; Lemeš, S.; Obucina, M.

Vol. 15, Number 4, An example of cranioplasty with the assistance of 3D printing technology: Case report, Spahić, D.; Beculić, H.

Vol. 15, Number 4, The influence of the shape of the convergent nozzle on the flow quality in the test section of the wind tunnel, Bešlagić, E.

Vol. 15, Number 4, Possibility of using textile waste as an energy source in the cement industry, Šišić, M.

Vol. 15, Number 4, Model making by additive 3D printing process and dimensional verification on CMM, Zaimović-Uzunović, N.; Kačmarčik, J.; Vardaa, K.; Lemeš, S.; Spahić, D.

Vol. 15, Number 4, Recycling of Ferrous By-Products in Iron and Steel Plants, chwelberger, J.; Brunner, Fleischander, A.; Mandara, Z.

Vol. 15, Number 4, Masinstvo (complete PDF)

Year 2017

Vol. 14, Number 1, Voltage state in the bearing rollers of the rotary kiln, Žiga A., Kačmarčik J.

Vol 14. Number 1, Calculation of the parameters of the monorail suspension railway (JVŽ) in the premises of the pit route of the plant "Haljinići" ZD RMU "Kakanj" DOO Kakanj, Sredojević J., Bajramović K.

Vol 14. Number 1, Incineration in the region belonging to the Mošćanica regional landfill – a chance?, Selimović S.

Vol 14. Number 1, Advantages of using bioreactors in the process of controlled biowaste composting, Šišić M, Bikić F.

Vol 14. Number 1, Analysis of structural requirements necessary for stable management and movement of buses, Ajanović M, Nunić Z, Klisura F, Petković S.

Vol 14, Number 1, Masinstvo (complete PDF)

Vol 14, Number 2, Brake disc damage analysis by coordinate measuring machine and 3D CAD modeling, Karić A, Lemeš S

Vol 14, Number 2, Quality Improvement Strategies Common Goal and Diversity of Ways, Hamrol A.

Vol 14, Number 2, Evaluation of work performance of academic staff, Objective model, Dedić E.

Vol 14, Number 2, Maintenance and Performance of Machinery on Construction Sites, Vidaković D, Lacković Z, Ivanović M.

Vol 14, Number 2 Mechanical Engineering (complete PDF)

Vol 14, Number 3, Research on increasing the fire resistance of materials using a modern method of applying metal coatings, Rimac M, Oruč M, Posavljak S.

Vol 14, Number 3, Achievements and development directions of quality assurance in higher education in Bosnia and Herzegovina on the example of the University of Zenica, Plančić I, Čabaravdić M.

Vol 14, Number 3, Some problems of management of higher education institutions, Brdarević S, Zaimović-Uzunović N.

Vol 14, Number 3, Trends in Maintenance, Krebelj P.

Vol 14, Number 3 Mechanical Engineering (complete PDF)

Vol 14, Number 4, Significance of toughness and fatigue testing of aluminum 6xxx alloys, Dženana Gačo, Bahrudin Hrnjica, Esad Bajramović.

Vol 14, Number 4, District heating system in Kakanj, Almir Kahriman, Nedim Hodžić, Elma Ekinović.

Vol 14, Number 4, Comparison of district heating systems of cities in transition countries, Maja Mrkić Bosančić, Petar Gvero, Jusuf Ibrulj, Azrudin Husika, Srđan Vasković.

Vol 14, Number 4, Analysis of the solution of the slope of the cut using the methods of reinforced soil, nailing and construction of a retaining wall, Turčinović N.

Vol 14, Number 4, Analysis of attractiveness of science and technology studies, Brdarević S, Arnaut D.

Vol 14, Number 4 Mechanical Engineering (complete PDF)

Year 2016

Vol. 13, Number 1, Januar-Juni/January-June

Vol. 13, Number 2, April-June/April-June

Vol. 13, Number 3, July-September

Vol. 13, Number 4, Wind Power Diagnostics, Antunović R., Halep A.

Vol 13. Number 4, Isothermally Improved Nodular Casting, Avdušinović H., Dervišević Š., Gigović-Gekić A.

Vol 13. Number 4, The use of alternative fuels in the cement industry as a way of saving non-renewable energy sources, Bajtarević A., Bajtarević A.

Vol 13. Number 4, Significance of process and assessment of process quality, Pobrić S., Klarić S.

Vol 13. Number 4, Sturm-Liouville-type differential operator on segments [0,pi] with variable delay, Calco I

Year 2015

Vol. 12, Number 1-2, Januar-Juni/January-June

Vol. 12, Number 3-4, July-December

Year 2004

Num. 1, January-March/January-March (No.1, 2, 3, 4, 5)

Num. 2, April-June/April-June (No.1, 2, 3, 4, 5)

Num. 3, July-September (No.1, 2, 3, 4, 5)

Num. 4, October-December (No.1, 2, 3, 4, 5)

Year 2003

Num. 1, January-March/January-March (No.1, 2, 3, 4)

Num. 2, April-June/April-June (No.1, 2, 3, 4, 5)

Vol. 3, July-September (No.1, 2, 3, 4, 5)

Vol. 4, October-December (No.1, 2, 3, 4, 5)

Year 2002

Num. 1, January-March/January-March (No.1, 2, 3, 4, 5)

Num. 2, April-June/April-June (No.1, 2, 3, 4)

Num. 3, July-September (No.1, 2, 3, 4, 5, 6)

Num. 4, October-December (No.1, 2, 3, 4, 5)

Year 2001

Num. 1, January-March/January-March (No.1, 2, 3, 4)

Num. 2, April-June/April-June (No.1, 2, 3, 4, 5)

Num. 3, July-September (No.1, 2, 3, 4)

Num. 4, October-December/Oct.-December. (No.1, 2, 3, 4, 5)

Year 2000

Num. 1, January-March/January-March (No.1, 2, 3, 4)

Num. 2. 2, April-June/April-June (No.1, 2, 3, 4)

Num. 3, July-September (No.1, 2, 3, 4)

Num. 4, October-December/Oct.-December. (No.1, 2, 3, 4)

Year 1999

Num. 1, January-March/January-March (No.1, 2, 3, 4)

Num. 2, April-June/April-June (No.1, 2, 3, 4)

Num. 3, July-September (No.1, 2, 3, 4)

Num. 4, October-December/October-December. (No.1, 2, 3)

Year 1998

Num. 1, January-March/January-March (No.1, 2, 3, 4, 5)

Num. 2, April-June/April-June (No. 1, 2, 3, 4, 5)

Num. 3, July-September (No.1, 2, 3, 4, 5)

Num. 4, October-December/Oct.-December. (No.1, 2, 3, 4, 5)

Year 1997

Num. 1, January-March/January-March (No.1, 2, 3, 4, 5)

Num. 2, April-June/April-June (No.1, 2, 3, 4, 5, 6)

Num. 3, July-September/July-Sept. (No.1, 2, 3, 4, 5, 6)

Num. 4, October-December/Oct.-December. (No. 1, 2, 3, 4, 5)

BA